| RHP MRJ6.1/2EM Cylindrical Roller Bearings | da min:29 mm; Precision Class:ABEC 1 | ISO P0; Enclosure Type:Non-Contact Seal; Maximum Capacity / Filling Slot:No; rs min:0.6 mm; Fatigue limit load, Cu:0.27 kN; Keyword String:Ball; Cage Material:Steel; B:12 mm; Characteristic inner ring frequency, BPFI:5.88 Hz; |
| RHP SNP1.1/2EC Bearings | Mass:0.08 kg; Category:Single Row Ball Bear; Characteristic cage frequency, FTF:0.41 Hz; da min:29 mm; Fatigue limit load, Cu:0.27 kN; Internal Clearance:Special; Noun:Bearing; Other Features:Deep Groove; D:47 mm; |
| RHP XLJ1.7/8JEP1 Single Row Ball Bearings | T min.:-20 °C; N1:16 mm; Designation of bearing:UC205-16G2L4; A1:12 mm; N:19mm; H2:51 mm; Recommended tightening torque for set screw:3.7 Nm; d:25.4 mm; C:14 kN; P:150 mm; |
| RHP 21309KJ Bearings | Brand:SNR; Da max:118 mm; D:130 mm; Y1:1.95; Radial clearance class:CN; Dynamic load, C:340 kN; Min operating temperature, Tmin:-40 °C; Y0:1.91; da min:72 mm; Nlim:5,100 rpm; |
| RHP SNP40FS Bearings | A3:1.5 mm; C:14 kN; G:M6x1; T max.:100 °C; H:80 mm; d:19.05 mm; T min.:-20 °C; s1:18.5 mm; Adapter sleeve reference:H2305-12; A5:18.5 mm; |
| RHP SNP3/4EC Bearings | d:23.81 mm; H:36.5 mm; L:130 mm; H1:14.5 mm; S:14.3 mm; C0:7.88 kN; J:103 mm; T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:PE205-; |
| RHP SF75DEC Bearings | N:14mm; s1:24.6 mm; e:24 mm; C0:20.8 kN; Dz:95 mm; d:45 mm; T max.:100 °C; J:148.5 mm; Z:57.7 mm; Recommended tightening torque for set screw:11.5 Nm; |
| RHP LT1 1/4B Bearings | Seal Type:Triple Lip; Housing Material:Stainless Steel; Bearing Inner Ring Material:Stainless Steel; Base to Center Height:Not Applicable; Retainer Type:Max Life Cage; Bearing Locking Device:Setscrew; Bearing Outer Ring Material:None; Self Aligning:Self Centering; Grease Type:Mobilgrease FM222; Flinger Material:Stainless Steel; |