| M 255449 D/410/410 D Tapered Roller Bearings | radial static load capacity:920 kgf; seal type:Contact with Slinger; manufacturer product page:Click here; inner ring width:38.1 mm; outer ring width:19 mm; bearing material:440C Stainless Steel; locking device:Set Screw Collar; D:2.4409 in; radial dynamic load capacity:1700 kgf; series:MUC200; d:30 mm; bore type:Round; |
| NCF 1872 V Tapered Roller Bearings | width:0.7500 in; Weight:0.27 lb; lip material:Labyrinth; typical application:Exceptional Bearing; manufacturer catalog number:29502-1584; construction description:ISO-GARD® Flange; continuous temperature range:-22 to 400°F; D:6.1770 in; pressure tolerance:Ambient; harmonization code:3926904590.US; maximum shaft surface speed:4500 fpm; misalignment tolerance:0.020 in; shaft diameter:5.1309 in; |
| EE161400/161901D Cylindrical Roller Bearings | lubrication type:Lubrication Fitting; rod hole diameter:1-1/8 in; seal type:Contact with Slinger; series:UCNST200C4HR23; locking device:Set Screw; overall length:5-1/8 in; overall height:4-1/2 in; dynamic load capacity:6590 lbf; unit type:Side Mount; slot width:0.3125 in; d:1.5000 in; housing material:Cast Iron; slot spacing:2.9375 in; |
| 690RX2966CF1 Tapered Roller Bearings | B:21.8 mm; S2 (min):4.5 mm; Cup ra (max):1.5 mm; Constant e:0.42; Db (min):85 mm; Static Load Rating:91,700 N; Dynamic Load Rating:76,500 N; Da (min):79 mm; Bore Type:Cylindrical Bore; Configuration:Single Row; D:90 mm; S1 (min):3 mm; Limiting Speed - Grease:4,300 rpm; Limiting Speed - Oil:5,700 rpm; Load Center:1.7 mm; Axial Load Factor Y1:1.43; C:17 mm; db (max):58 mm; Enclosure:Open; da (min):58.5 mm; |
| 26064 E1A-MB1 Plain Bearings | outer ring width:2.1654 in; d:75 mm; bore type:Straight; cage type:Roller Guided; D:160 mm; finish/coating:Uncoated; B:55 mm; operating temperature range:Maximum of +212; outer ring type:Not Split; static load capacity:98000 lbs; series:223; fillet radius:0.079 in; dynamic load capacity:83000 lb; application:Vibratory Applicatio; internal clearance:C0; lubrication hole type:Lubrication Groove &; |
| 48290DGW/48220 Needle Non Thrust Roller Bearings | contact angle:30 °; maximum rpm:6700 RPM; D:85 mm; precision rating:Not Rated; bearing material:Chrome Steel; closure type:Double Shield; cage material:Steel; outer ring width:30.16 mm; radial static load capacity:8770 lbf; finish/coating:Uncoated; fillet radius:1 mm; internal clearance:C0; d:45 mm; row type & fill slot:Double-Row Non-Fill; B:1.1875 in; series:5200-C; radial dynamic load capacity:11000 lbf; |
| T7519 Needle Self Aligning Roller Bearings | B:8.4375 in; maximum rpm:1400 RPM; finish/coating:Powder Coated; flange mounting type:Four-Bolt Square; seal type:Contact/Lip; overall depth:4-1/2 in; radial static load capacity:91900 lbf; bearing type:Spherical Roller; radial dynamic load capacity:82000 lbf; d:2-11/16 in; housing material:Cast Iron; standards met:ANSI/ABMA STD 9; overall height:8-7/16 in; lubrication type:Lubrication Fitting; |
| HM 262449 DW/410/410 D Needle Roller Bearings | B:1.3740 in; outer ring width:0.7520 in; series:SSER; duty type:Normal Duty; d:25 mm; radial static load capacity:1288 lbs; locking device:Set Screw; manufacturer upc number:8865590637362; inner ring width:1.3740 in; D:2.0472 in; seal type:FDA Approved Silicon; manufacturer catalog:Click here; radial dynamic load capacity:2520 lbs; bore type:Round; |
| 545991/Y Angular Contact Ball Bearings | series:HNGC; thread size:1-1/2 in; manufacturer catalog number:061084; D:5.3800 in; housing material:Cast Iron; locking device:None; radial dynamic load capacity:2100 lb; finish/coating:Uncoated; seal type:Labyrinth; maximum rpm:2000 RPM; thread length:5/8 in; B:7.6300 in; d:2.4375 in; |
| 29256 E1.MB Thrust Roller Bearings | lubrication type:With Lubrication Fit; grade:Commercial/Indu; d:14 mm; housing material:Carbon Steel - corro; head diameter:34.75 mm; series:MC; thread direction:Right Hand; misalignment angle:21 °; rod end type:Male Threaded; ball width:19 mm; shank thread length:36 mm; lubrication:Unlubricated; head width:12.25 mm; length to ball center:60 mm; ball material:52100 BEARING STEEL; shank thread size:M14 x 2.0; |