| 92-20 1091/1-37272 IMO Slewing Ring Bearings | bearing type:Roll End Plain Beari; material specification:Delrin, Celcon; bore shape:Round; bearing material:POM; compatible tubing gauge:16 ga; compatible tubing outside diameter:1-1/2 in; B:7/8 in; maximum pv value:3000; bearing outside diameter:1.37 in; operating temperature range:Maximum of +225; closure type:Open; outside diameter design:Straight; bore size:5/8 in; |
| 73035L Franke Slewing Ring Bearings | finish/coating:Black Oxide; mounting:Two-Bolt Base; overall height:3.2500 in; seal type:Contact/Lip; d:1.2500 in; bore type:Round; housing material:Cast Iron; D:4.2500 to 5.0000 in; maximum rpm:6500 rpm; B:1.5200 in; locking device:Set Screw; expansion type:Non-Expansion Bearin; manufacturer catalog number:123589; standards met:UL, AFBMA, AGMA, ASM; base to bore centerline:1.6250 in; duty type:Normal Duty; |
| 68955A Franke Slewing Ring Bearings | D:2.0000 in; bore type:Round; internal clearance:Normal Clearance; d:0.8750 in; closure type:Double Sealed; B:0.5625 in; |
| MTO-265X Kaydon Slewing Ring Bearings | Fillet Radius/Chamfer:2 mm; Bore Type:Cylindrical Bore; Limiting Speed - Oil:6,100 rpm; S2 (min):5 mm; da (min):50 mm; Configuration:Single Row; db (max):52 mm; C:20 mm; S1 (min):3 mm; B:25.3 mm; Db (min):82 mm; Axial Load Factor Y0:0.96; D:90 mm; Limiting Speed - Grease:4,500 rpm; Constant e:0.35; Weight:0.757 kg; Static Load Rating:101,000 N; Da (min):77 mm; r1:1.5 mm; |
| 11-16 0200/1-0811 IMO Slewing Ring Bearings | D:15/16 in; maximum v value:400 fp/min; maximum p value:1000 psi; overall length:3/4 in; groove/plug type:None; bearing material:Fiberglass Reinforce; maximum pv value:50000; material specification:BOSTonE F-1; d:11/16 in; sleeve bearing type:Plain Sleeve; operating temperature range:-400 to +550 &d; |
| 68709A Franke Slewing Ring Bearings | maximum rpm:6500 RPM; closure type:Open; standards met:ANSI/ABMA 18.2,; precision rating:Not Rated; lubrication hole type:No Hole; d:5/8 in; compatible inner ring:IR-612-1; D:7/8 in; series:BH; dynamic load capacity:3680 lbf; cage material:No Cage; B:5/8 in; static load capacity:5680 lbf; drawn cup type:Open Ends with Full; |
| 68763A Franke Slewing Ring Bearings | mounting:Two-Bolt Base; housing material:Cast Iron; base to bore centerline:1.3125 in; d:1.0000 in; manufacturer upc number:4547359664904; bore type:Round; locking device:Set Screw; |
| 12-20 0311/1-32202 IMO Slewing Ring Bearings | width:0.7500 in; harmonization code:3926904590.US; shaft diameter:2.5000 in; construction description:ISO-GARD® Flange; typical application:Exceptional Bearing; continuous temperature range:-22 to 400°F; manufacturer catalog number:29502-7461; lip material:Labyrinth; misalignment tolerance:0.020 in; D:4.4200 in; maximum shaft surface speed:4500 fpm; pressure tolerance:Ambient; Weight:0.4 lb; |
| 11-25 1455/1-0317 IMO Slewing Ring Bearings | housing material:Carbon Steel - Corro; rod end type:Male Threaded; manufacturer catalog number:KMR12-14Z; lubrication:Unlubricated; misalignment angle:12 °; shank thread size:7/8/-14 in; head width:0.687 in; ball material:52100 Bearing Steel; thread direction:Right Hand; ball width:0.875 in; head diameter:2.000 in; standards met:SAEJ1120; shank thread length:1.875 in; lubrication type:With Lubrication Fit; |
| 74144A Franke Slewing Ring Bearings | B:2.0000 in; static load capacity:190300 lbs; D:10.0000 in; cage material:Cast Brass; bearing material:Case Carburized Stee; series:700; d:6.0000 in; thrust bearing type:Single-Direction; washer width:0.5600 in; housing washer inside diameter:6.3800 in; |