| 162.40.2128.891.41.1503 Standard 5 Slewing Ring Bearings | D:230 mm; d:130 mm; T:30 mm; Weight:5,97 Kg; B:30 mm; Bearing number:130XRG23; (Grease) Lubrication Speed:650 r/min; Basic dynamic load rating (C):105 kN; Outer Diameter (mm):230; Basic static load rating (C0):335 kN; Size (mm):130x230x30; Width (mm):30; Bore Diameter (mm):130; r:1,5 mm; |
| 12.35.1960.400.11.1503 Standard 5 Slewing Ring Bearings | r0:0.5 mm; D1:93 mm; Bore Diameter (mm):110; d1:72 mm; Limiting speed:10000 r/min; ra - max.:1.5 mm; d1 ≈:72 mm; Calculation factor Y0:0.58; Calculation factor - X:0.6; B:22 mm; Width (mm):22; Calculation factor e:0.95; Size (mm):110x60x22; Fatigue load limit Pu:4 kN; Calculation factor - Y2:1.07; D1 ≈:93 mm; b:6.5 mm; Outer Diameter (mm):60; Calculation factor - Y0:0.58; |
| 121.40.5000.990.41.1502 Standard 5 Slewing Ring Bearings | Bearing number:TSF.R 3; l3 min.:10 mm; d4:6,5 mm; d5:8 r/min; C1:4,5 mm; d1:7,4 mm; P:2,8 mm; W:7 mm; θ:9,30 mm; Weight:0,007 Kg; Bore Diameter (mm):3; Angle:13 °; h1:21 mm; Thread (G):M3x0,5; B:6 mm; d:3 mm; d2:12 mm; l5:3 mm; |
| 191.50.4500.990.41.1502 Standard 5 Slewing Ring Bearings | Bearing Type:straight; Wall Thickness (S3):2.000; Bearing number:AST090 4035; Housing Bore Dia. (Dh) - 44 +0.025 / -0:44 +0.025 / 0; OD Chamfer Length (Co):1.200; Bearing Outside Diameter, Nominal(Do):44.000; Material:Wrapped bronze with; Bearing Bore after Mounting (di) - 40 +0.062 / -0:40 +0.062 / 0; Bore Diameter (mm):40; Shaft Size (ds) - 40 -0.080 / -0.105:40 0.080 / 0.105; ID Chamfer Length (Ci):0.500; |
| 162.40.2240.890.11.1503 Standard 5 Slewing Ring Bearings | Fatigue load limit (Pu):0,655; Size (mm):35x72x42.9; d1:46,1 mm; Width (mm):42,9; D:72 mm; r1 min.:1 mm; s1:25,4 mm; Bearing number:YAR207-2RF/VE495; Weight:0,42 Kg; Basic dynamic load rating (C):25,5 kN; B:42,9 mm; Outer Diameter (mm):72; d:35 mm; Basic static load rating (C0):15,3 kN; r2 min.:1 mm; C:19 mm; Bore Diameter (mm):35; |
| 161.50.2660.891.41.1503 Standard 5 Slewing Ring Bearings | B:27 mm; Y0:0.95; Cu:25.5; Calculation factor (e):0,35; (Refer.)Mass(kg):0.762; Width (mm):27; ra max.:1,5 mm; Da(max):91.5; Db min.:96 mm; Oil lub.:4800; ra(max):1.5; Grease lub.:3600; D:100 mm; rb max.:1,5 mm; r min.:1,5 mm; Da min:89 mm; Size (mm):65x100x27; r1(min):1.5; C0r:169; r2 min.:1,5 mm; |
| 62.40.1700.008.29.1503 Standard 5 Slewing Ring Bearings | Da min:161 mm; TC-RA:426; TC-BET21:2; da:135; LangID:1; Width (mm):48; TC-DA2:13.615; Bearing number:HR33024J; hidTable:ecat_NSTPRM; C0:540; SDM_:148.544; C0r:55000; e:0.31; Bore Diameter (mm):120; ra max.:2 mm; D_a1:168; DA_:14.242; Sa:6; D_a2:161; Calculation factor (Y0):1,1; |
| 162.28.1600.891.21.1503 Standard 5 Slewing Ring Bearings | D:130 mm; Bore Diameter (mm):69,85; B:77,8 mm; M:5,56 mm; C:29 mm; Outer Diameter (mm):130; S1:44,45 mm; d:69,85 mm; J:12 mm; Thread (G):M12X1,75; Basic dynamic load rating (C):69,5 kN; Size (mm):69.85x130x77.8; Width (mm):77,8; S:33,32 mm; F:91,92 mm; Bearing number:GY1212KRRB; |
| 161.40.2368.890.11.1503 Standard 5 Slewing Ring Bearings | P:102 mm; E:130 mm; J:64 mm; H1:119 mm; K:22 mm; A:146 mm; d:60 mm; Q:64 mm; S:35 mm; R:32 mm; L:46 mm; Bearing number:UCT212; F:25,4 mm; B:65,1 mm; H2:102 mm; G:19 mm; H:194 mm; Bore Diameter (mm):60; |
| 161.36.1800.890.11.1503 Standard 5 Slewing Ring Bearings | Angle (α):15 °; B1:52 mm; Size (mm):80x140x52; Outer Diameter (mm):140; a:3,5 mm; D:140 mm; d:80 mm; Bore Diameter (mm):80; Bearing number:7216 CDF; Width (mm):52; |